Welcome to Guangzhou Shengfeng Hardware Co.,Ltdwebsite!


Navigation
Hot Products
Contact us
Hotline
020-34831869
Address:No. 5, West Village, Shawan Town, Shawan Town, Panyu District, Guangzhou
Location: > english > Product > Rivers > Pressing rivets >
SKC positioning columns
Auther: Pubdate:2018-09-17
 
 
SKC positioning shores

SKC positioning columns
Can make the P.C. board or parts quickly sliding in place;Only when taken out of the plate on the side of the slide to be removed.
Material: stainless steel SUS303, at the same time also can provide other material type SKC positioning columns, such as carbon steel.In the case of no special instructions, the standard for the stainless steel material.
skc


SKC shores of short size
SKC support card column of the standard
This figure is SKC positioning shores:
SKC
Metric specifications of SKC positioning table columns specification: MM

Model TYPE size The LENGTH of the LENGTH CODE + / - 0.13 L A B C S M H D
Stainless steel Stainless steel Body Size LENGTH CODE IN MILLMETERS + / - 0.08 + / - 0.08 Max + / - 0.08 Max NOM ANVIL HOLE
Sheet Code + 0.08
SKC 61.5 6 8 10 12 14 16 18 20 22 25 2.5 4.5 5.38 1.72 2.75 6.35 5.5

The plank requirements and specifications:

Model TYPE Sheet 1 PANEL 1 Sheet 2 PANEL 2
Bottom hole size Maximum hardness The minimum thickness The minimum margins The largest deviation Roof hole size material The thickness range The minimum margins
Stainless steel Stainless steel BOTTOM HARDNESS THICKNESS EDGE DIS ANCE LOCATION TOLERANCE MAX TOP MOUNTING HOLE EDGE DIS
MOUTING A1 A2 A3 A4 MATERIAL THICKNESS RANGE ANCE
HOLE B+0.08 MAX MIN C1 MIN C2 MIN
SKC 5.41 HRB 70 1 6.6 + / - 0.13 1.5 3 5 3.75 PC board or metal 1.45 to 1.62 4.1

 

English (American) specifications of SKC positioning columns specification table: unit "(inch) Note: the following code length is only code, the actual length of "L / 32 inches
Model TYPE size The LENGTH of the LENGTH CODE + / - 0.005 L A B C S M H D
LENGTH CODE IN 32THS OF AN INCH
Stainless steel Stainless steel Body Size 188. 250. 312. 375. 437. 500. 562. 625. 750. 875. 1.00 003 + / -. 003 + / -. Max 003 + / -. Max NOM ANVIL HOLE
Sheet Code + 0.003
SKC 6060 6 8 10 12 14 16 18 20 24 28 32 099. 177. 212. 068. 108. 250. 216.

Also, the following is a requirement for sheet standards:
Model TYPE Sheet 1 PANEL 1 Sheet 2 PANEL 2
Bottom hole size Maximum hardness The minimum thickness The minimum margins The largest deviation Roof hole size material The thickness range The minimum margins
Stainless steel Stainless steel BOTTOM HARDNESS THICKNESS EDGE DIS ANCE LOCATION TOLERANCE MAX TOP MOUNTING HOLE EDGE DIS
MOUTING A1 A2 A3 A4 MATERIAL THICKNESS RANGE ANCE
HOLE B+0.003 MAX MIN C1 MIN C2 MIN
SKC 0.213 HRB 70 . 04 26. 005 + / -. 059. 118. 197. 148. PC board or metal , 057-057 160.

Support the card column installation

SKC support card column installation schematic diagram:


A larger appreciation